Welding Machine With 03 Heads

3-IN-1 WELDING MACHINE!

It has 03 welding heads in a single piece of equipment.

Composed of three heads, one for Spot Welding, one for Projection Welding (both rotate clockwise and counter-clockwise), and also a Welding Pincer, which, among other applications, is capable of finishing your parts, especially those made of wire, by performing welding on the sides.

The SPX 3D model is a super versatile machine with applications for welding sheets and welding wires with the most diverse geometries.

Understand a little more about how the machine works:

Basically, the parts are arranged on the table, and according to the part selected in the PLC and the defined welding positions, the table moves to the initial position and then moves step by step through the areas to be welded.

After finishing the welding positions, the jig returns to the discharge position and releases the part for the operator's access. The operator manually tilts the table out of the equipment, removes the finished parts, and places new parts to be welded on the table, restarting a new welding cycle while preparing the other table that has been unloaded.

The layout configuration system, welding areas, spacing between points, and the possibility of various welding power options adjusted by the operator/production programmer are part of the equipment's setup.

The electronic system monitors possible failures of positioning sensors and the entire safety system. Light curtains will restrict access while the equipment is in operation.

To facilitate the table's preset, centering pins are positioned at its ends, as well as on the electrodes, ensuring their centering and respective zeroing;

Productivity will depend heavily on the model/volume of the part to be manufactured, considering points with an average displacement of 800mm/s.

From the simplest to the most complex parts you need to weld, the SPX3D-1000 will meet your needs!